Saturday, 8 February 2014
Tuesday, 4 February 2014
How to BIOS wait EC input Buffer Empty fail (Time out) Problem
How to Solve BIOS wait EC input Buffer Empty fail (Time out) Problem
you will see this problem if there is something wrong with the BIOS or CMOS battery. Replacing CMOS battery mostly solve this problem
Step 1: Remove the battery from the laptop
Step 2: Remove the CMOS battery
Step 3: Replace the CMOS battery , try with old one if does not work with old one then replace with new one.
Step 4: After replacing the battery adjust time and date going to BIOS setup.Reboot the laptop
Saturday, 28 December 2013
iPhone 5 screen replacement
There are two types of screen available for iPhone 5.
One comes with home button inside , earpiece , front camera with screen ,
another type of screen does not have these.
Step by Step Procedure to change iPhone 5 screen:
1. Remove SIM tray and SIM card
2. Remove two screws from bottom side of the phone
3. Lift of the screen from bottom side of the phone very carefully, hold the screen
4. Remove 3 screws from LCD and logic board's connector top
5. Disconnect 3 LCD cables from logic board
If the new LCD does not have inside home button, earpiece and camera then
a) Remove 3 screws from home button cover and Remove the inside home button and home button connector
b) Remove 3 screws from earpiece and front camera side, Remove the earpiece then apply little bit heat and remove front camera with cable
c) Insert Home button , earpiece and front camera in the new screen
6.Remove 4 screws for back side of the LCD and lift the metal from old LCD and put it in the new LCD.
7. Connect the 3 LCD cable to the logic board
8. Put the cover and 3 screw
9. Put the New LCD from top side
10. Put 2 screws in the bottom side
11. Insert the SIM tray in the phone
One comes with home button inside , earpiece , front camera with screen ,
another type of screen does not have these.
Step by Step Procedure to change iPhone 5 screen:
1. Remove SIM tray and SIM card
2. Remove two screws from bottom side of the phone
3. Lift of the screen from bottom side of the phone very carefully, hold the screen
4. Remove 3 screws from LCD and logic board's connector top
5. Disconnect 3 LCD cables from logic board
If the new LCD does not have inside home button, earpiece and camera then
a) Remove 3 screws from home button cover and Remove the inside home button and home button connector
b) Remove 3 screws from earpiece and front camera side, Remove the earpiece then apply little bit heat and remove front camera with cable
c) Insert Home button , earpiece and front camera in the new screen
6.Remove 4 screws for back side of the LCD and lift the metal from old LCD and put it in the new LCD.
7. Connect the 3 LCD cable to the logic board
8. Put the cover and 3 screw
9. Put the New LCD from top side
Saturday, 14 December 2013
How to Remove keyboard from Mac Book Pro
1. Remove all screws from the back side
2. Remove Back cover
3. Remove battery jacket before doing anything
4. Unplug all jackets
5. Remove the screws from the logic board
6. Remove logic board
7. Remove 2 screws from the speaker and lift the speaker gently
8. Remove optical drive
9. Remove 2 screws from the mid panel and remove mid panel
10. Remove glue gently and then remove the bottom layer of the keyboard
11. Remove all small tiny screws and then remove the top layer of the keyboard
2. Remove Back cover
3. Remove battery jacket before doing anything
4. Unplug all jackets
5. Remove the screws from the logic board
6. Remove logic board
7. Remove 2 screws from the speaker and lift the speaker gently
8. Remove optical drive
9. Remove 2 screws from the mid panel and remove mid panel
10. Remove glue gently and then remove the bottom layer of the keyboard
11. Remove all small tiny screws and then remove the top layer of the keyboard
How to Remove Hard Drive from Sony Vaio VGN-S270P
Most of the laptop Hard drive is located just back of the laptop with Hard Drive cover. In this case just need to remove the cover and easy to remove the hard drive. But some of the laptop has the Hard Drive under the keyboard. Sony Vaio VGN-S270P has the hard drive under the keyboard. Here is the step by step process to Remove Sony Vaio VGN-S270P Hard Drive:
1. Switch off the laptop, Disconnect the charger and Remove the battery.
2. Remove all screws from the back of the laptop
3. Unlock the keyboard F4 and F12 key and remove the keboard
4. Remove all screws from keyboard panel
5. Unplug all cable on top of the panel and take off panel
6. Unplug the yellow hard drive cable from motherboard connector
7. Remove the Hard Drive
Subscribe to:
Posts (Atom)






















